Advances in Materials Science and Engineering
1.399
Current Impact Factor
1.399
Current Impact Factor
101
Days
Average time from submission to acceptance
48
Days
Average time from acceptance to publication
Most Viewed Articles
Effect of w/c ratio on durability and porosity in cement mortar with constant cement amount | 7,599 |
An overview of nanomaterials for water and wastewater treatment | 6,761 |
Properties of Reinforced Concrete Steel Rebars Exposed to High Temperatures | 6,133 |
A Study in Physical and Mechanical Properties of Hemp Fibres | 5,367 |
Effects of clay and moisture content on direct shear tests for clay sand mixtures. | 5,023 |
Correlation between the compressive, tensile strength of old concrete under marine environment and prediction of long-term strength | 4,254 |
Analysis of chemical composition of Portland cement in Ghana: A key to understand the behavior of cement | 3,966 |
Dielectric Properties of 3D Printed Polylactic Acid | 3,931 |
Compressive strength of compacted clay-sand mixes | 3,775 |
A review on fatigue life prediction methods for metals | 3,711 |
Most Viewed Special Issue Articles
A review on removal of pollutants from water/wastewater using different types of nanomaterials | 10,681 |
Feasibility of Pulverized Oyster Shell as A Cementing Material | 8,853 |
Evaluation of relationship between water absorption and durability of concrete materials | 7,295 |
Cement Types, Composition, Uses and Advantages of Nanocement, Environmental Impact on Cement Production and Possible Solutions | 7,248 |
Salt Damage and Rising Damp Treatment in Building Structures | 6,756 |
Zeolite Y - Synthesis, Modification, Properties: a Case Revisited | 5,790 |
Calculation of Axial Compression Capacity for Square Columns Strengthened with HPFL and BSP | 5,659 |
A Review on Conduction Mechanisms in Dielectric Films | 4,244 |
Electrical Resistivity of Concrete for Durability Evaluation | 3,496 |
FLEXURAL STRENGTH EVALUATION OF REINFORCED CONCRETE MEMBERS WITH ULTRA HIGH PERFORMANCE CONCRETE | 3,263 |